Pdr-mounts UCMM50 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für Video Pdr-mounts UCMM50 herunter. PDR Mounts UCMM50 User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 4
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Model
UCMM50 UNDER CABINET MONITOR MOUNT
To ensure the correct usage, please read and follow the instructions
manual thoroughly. Please store the instructions in a safe place
1
Special techniques are necessary for installation of the panel display mount.
Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.
All PDR mounts and adapters carry a limited lifetime warranty against defects in material and workmanship. We are not liable
for improper installation that results in damage to mounts, adapters or presentation equipment.
Mounts by
A division of David Engineering & Mfg. Inc.
! Suitable for displays with 75mm &
100mm VESA mounting pattern
! Simple to adjust no tools required
! 2”Adjustable height from 6.8” to 8.8”
! 100 deg tilt and 360 deg.
rotation
! Quick monitor removal with exclusive
Features
Thank you for purchasing the PDR monitor mount with the exclusive “Bayonet locking system”
To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to
withstand the weight of both the monitor and the mount.
Quick disconnect lever
Height adjuster
View angle adjuster
Mounting plate
Mounting hardware
Wood screw
Monitor mounting screw
Projector wall mounting application fig 2
360 deg Rotation
for future reference.
Seitenansicht 0
1 2 3 4

Inhaltsverzeichnis

Seite 1 - Mounts by

Model UCMM50 UNDER CABINET MONITOR MOUNT To en

Seite 2

Avoid installing in locations where the temperature and humidity are excessively high, and where contact with any . Do not install in locations whe

Seite 3 - Enlarged view

Fig 5Fig 3AView under cabinetCabinet front lipView “A”Enlarged viewFig 4Position flush to front edgeWood screwsLay the monitor on a soft surface, face

Seite 4 - Tilt adjust

3. MOUNT THE MONITOR ASSEMBLY TO THE CABINET Fig 6 4Place the monitor assembly into the bayonet slots on the mount ( small end into large end) an

Kommentare zu diesen Handbüchern

Keine Kommentare