Pdr-mounts upm100L Bedienungsanleitung PDF herunterladen

Model

UPM100L /UPM100XL LOCKING PROJECTOR MOUNT

To ensure the correct usage, please read and follow the instructions

manual thoroughly. Please store the instructions in a safe place

for future reference.

To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to withstand the weight of both the projector

and the mount.

Fully tighten all of the mounting screws as specified in the instructions.

Special techniques are necessary for installation of the projector display mount.

Do not attempt to perform this work by yourself.

Request an installation specialist to install this unit.

Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.

Please remember that if you remove the mount from the wall/ceiling later, you will find the screw holes and anchor bolts for the

mounting unit left on the wall.

All PDR mounts and adapters carry a lifetime warranty against defects in material and workmanship. We are not liable for

improper installation that results in damage to mounts, adapters or presentation equipment.

Mounts by

A division of David Engineering & Mfg. Inc.

=Complete security features (anti-theft)

=Simple to adjust, no tools required

=Security lock included

=To be used with any standard 1 ½” NPT pipe

=14 deg Pitch + 30 deg Yaw adjustments

=360° rotation

& Ceiling mount (Sold separately)

=Quick projector removal with exclusive

“Slide bay locking system”

Adjustable 1 ½” NPT Telescoping Pipe

Features

Thank you for purchasing the PDR Projector mount with the Security locking features.

Rotate 360 deg

Pitch and Yaw adjustments

Ceiling Mounting Flange And

Telescoping Pipe

Sold Separately

Security Lock

1 2 3 4

Inhaltsverzeichnis

Seite 1 - Mounts by

Model UPM1

Seite 2 -

the strength of the wood studs is not sufficient, add reinforcement. Always confirm the center of the stud is used for the installation. Avoid ins

Seite 3 - MOUNTING HARDWARE

STANDARD M2.5STEEL FLAT WASHER 4 REQUIRED1/4 X 1/2 X 3/16PLASTIC SPACER8 REQUIREDSECURITY TORX BIT T271 REQUIREDSTANDARD M4STEEL FLAT WASHER 4 REQUIRE

Seite 4 - MOUNTING THE PROJECTOR

MOUNTING THE PROJECTOR Fig 1Fig 1a 41: Place the projector on a padded surface.2: Locate the proper screws and washers supplied to fit your proje

Kommentare zu diesen Handbüchern

Keine Kommentare

Pdr-mounts upm100L Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für Video Pdr-mounts upm100L herunter. PDR Mounts upm100L User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör für Video Pdr-mounts upm100L