Pdr-mounts pdm110thn Bedienungsanleitung PDF herunterladen

Parts Configuration Chart

Features

Mo unting points for panel display models

Special techniques are necessary for installation of the panel display mount.

Do not attempt to perform this work by yourself.

Request an installation specialist to install this unit.

Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.

Please remember that if you remove the panel display from the wall later, you will find the screw holes and anchor bolts for the

mounting unit left on the wall. Also note that long use of the panel display may discolor the wall around it due to its heat and

airflow.

Low profile 15/16” (23.7mm)

16" or 24" stud mounting points

Easy installation

Lateral movement from center

for better viewing position.

Wall mount bracket…1 pc

5 mm x 16 mm Phillip screws…4 pcs

5/16" x 2 1/2” Lag bolts …4 pcs

6mm x 40mm Philips screws...4pcs

8mm x 40mm Philip screws...4 pcs

Plastic spacer...4 pcs

Display bracket .... 2 pcs

6 mm x 16 mm Phillip screws…4 pcs

5/16" Flat washers…4 pcs

8mm x 16mm Philip screw...4 pcs

Model # 110 = 32”

Square multi-mount washers...4 pcs

use with F,G,H,Lor M mounting screws

Model # 110 = 20”

See Model

Panel Display mounting points

See model #

Fig 1

All PDR mounts and adapters carry a limited lifetime warranty from ship date against defects in material and workmanship.

We are not liable for improper installation that results in damage to mounts, adapters or presentation equipment.

Mounts by

A division of David Engineering & Mfg. Inc.

Model: PDM110THN PANEL DISPLAY MOUNT

Locking bar... 1 pc

Top

Bottom

Thank you for purchasing the PDR panel display mount.

To insure the correct usage, please read and follow the instruction manual throughly. Please store the instructions in a safe

place for future reference.

To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to withstand the

weight of both the panel display and the wall mount.

Always use at least two persons for all installations.

Fully tighten all of the mounting screws as specified in the installation instructions.

5 mm x 40 mm Phillip screws...4 pcs

4 mm steel flat washer... 4 pcs

4mm x 16 phillips screw... 4pcs

Three position height adjustment

1 ½”& 3” vertical height adjustment

1 2 3 4

Inhaltsverzeichnis

Seite 1 - Mounts by

Seite 2 - Rev 092007

the strength of the wood studs is not sufficient, add reinforcement. Always confirm the center of the stud is used for the installation. Avoid ins

Seite 3 - 16 "

24"16 "16 "32"4.00EQUALSPACINGWOOD STUDS 1. FASTEN MOUNTING PLATE TO WALL F

Seite 4 - 4. Adjust lateral movement

3. MOUNT THE DISPLAY TO THE WALL MOUNT BRACKET Fig 5Fig 64. Adjust lateral movement Lateral Movement: 4Fig 7Once the display on the wall is

Kommentare zu diesen Handbüchern

Keine Kommentare

Pdr-mounts pdm110thn Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für Video Pdr-mounts pdm110thn herunter. PDR Mounts pdm110thn User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör für Video Pdr-mounts pdm110thn