Pdr-mounts pdm625f-8 Bedienungsanleitung PDF herunterladen

M odel

Thank you for purchasing the PDR panel display wall mount.

To ensure the correct usage, please read and follow the instructions

manual thoroughly. Please store the instructions in a safe place

for future reference.

To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to withstand the weight of both the panel

display and the wall mount.

Always use at least two persons for all installations.

Fully tighten all of the mounting screws as specified in the installation instructions.

Parts Configuration Chart Features

Special techniques are necessary for installation of the panel display mount.

Do not attempt to perform this work by yourself.

Request an installation specialist to install this unit.

Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.

Please remember that if you remove the panel display from the wall later, you will find the screw holes and anchor bolts for the

mounting unit left on the wall. Also note that long use of the panel display may discolor the wall around it due to its heat and

airflow.

Mounts by

A division of David Engineering & Mfg. Inc.

PDM625F-8 PANEL DISPLAY MOUNT

?Low profile 1 5/8”

?Easy installation

?16”/24”/36” wall stud mounting points

?Flat or 5° tilt (no tools required)

?Lateral movement from center for better viewing position

All PDR mounts and adapters carry a lifetime warranty against defects in material and workmanship.

Check the PDR website for details @ www.PDRmounts.com. We are not liable for improper installation that results in damage

to mounts, adapters or presentation equipment.

1 2 3 4 5

M odel T

the strength of the wood studs is not sufficient, add reinforcement. Always confirm the center of the stud is used for the installation. Avoid ins

Wall mount bracket…1 pc A B DE Display bracket ... 2 pcs GLFKC HMJLocking bar... 2 pcI5mm x 16mm...4 pcsMulti mount washer ...4 pcsPlastic spacer

1. FASTEN MOUNTING PLATE TO WALL Fig 22. SECURE THE DISPLAY BRACKETS TO THE MO NITOR NOTE:

3. MOUNT THE DISPLAY TO THE WALL MOUNT BRACKET Fig 4Fig 54. Adjust lateral movement Lateral Movement: Fig 6Fig 7Once the installation of the d

Keine Kommentare

Pdr-mounts pdm625f-8 Bedienungsanleitung