Pdr-mounts pdm110f Bedienungsanleitung PDF herunterladen

M odel

Thank you for purchasing the PDR panel display wall mount.

To ensure the correct usage, please read and follow the instructions

manual thoroughly. Please store the instructions in a safe place

for future reference.

To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to withstand the weight of both the panel

display and the wall mount.

Always use at least two persons for all installations.

Fully tighten all of the mounting screws as specified in the installation instructions.

Parts Configuration Chart Features

Mounting points for panel display models

Special techniques are necessary for installation of the panel display mount.

Do not attempt to perform this work by yourself.

Request an installation specialist to install this unit.

Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.

Please remember that if you remove the panel display from the wall later, you will find the screw holes and anchor bolts for the

mounting unit left on the wall. Also note that long use of the panel display may discolor the wall around it due to its heat and

airflow.

Low profile 1 5/8”

16" or 24" stud mounting points ( MODEL #110 )

Easy installation

Flat or 5 deg tilt (no tools required)

Lateral movement from center for better viewing position

Wall mount bracket…1 pc

5 mm x 16 mm Phillip screws…4 pcs

5/16" x 2 1/2” Lag bolts …4 pcs

Display bracket .... 2 pcs

6 mm x 16 mm Phillip screws…4 pcs

5/16" Flat washers…4 pcs

Model # 110 = 32” Model # 120 = 24”

Square multi-mount washers...4 pcs

Model # 110 = 20” Model # 120 = 14”

See Model

Panel Display mounting slots

See model #

Fig 1

Mounts by

A division of David Engineering & Mfg. Inc.

PDM 110/120F PANEL DISPLAY MOUNT

Locking bar... 1 pc

Top

Bottom

8 mm x 16 mm Phillip screws...4 pcs

8 mm x 40 mm Phillip screws...4 pcs

4 mm x 16 mm Phillip screws...4 pcs

Plastic spacer 3/4 x 1”...4 pcs

Use with #110

Use with #120

6mm x 40 mm Phillip screws...4 pcs

5 mm x 40 mm Phillip screws...4 pcs

4mm steel flat washer...4 pcs

All PDR mounts and adapters carry a limited lifetime warranty from ship date against defects in material and workmanship.

Check the PDR website for details @ www.PDRmounts.com. We are not liable for improper installation that results in damage

to mounts, adapters or presentation equipment.

1 2 3 4

Inhaltsverzeichnis

Seite 1 - Mounts by

M odel T

Seite 2 - Rev 032107

the strength of the wood studs is not sufficient, add reinforcement. Always confirm the center of the stud is used for the installation. Avoid ins

Seite 3 - 16 "

24"16 "16 "32"4.00EQUALSPACINGWOOD STUDS16"24"4.00EQUALSPACING 1.

Seite 4 - Lateral Movement:

3. MOUNT THE DISPLAY TO THE WALL MOUNT BRACKET Fig 4Fig 54. Adjust lateral movement Lateral Movement: Fig 64Fig 7Once the installation of the

Verwandte Modelle: pdm120f

Kommentare zu diesen Handbüchern

Keine Kommentare

Pdr-mounts pdm110f Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für Video Pdr-mounts pdm110f herunter. PDR Mounts pdm110f User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: pdm120f

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör für Video Pdr-mounts pdm110f