Pdr-mounts awm125 with pdm110thn Bedienungsanleitung PDF herunterladen

Model

AWM125-110 ARTICULATING WALL MOUNT INSTRUCTIONS

Thank you for purchasing the PDR mount.

To ensure the correct usage, please read and follow the instructions

manual thoroughly. Please store the instructions in a safe place

To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to withstand the weight

display and the wall mount.

Always use at least two persons for all installations.

Fully tighten all of the mounting screws as specified in the installation instructions.

Features

Special techniques are necessary for installation of the panel display mount.

Do not attempt to perform this work by yourself.

Request an installation specialist to install this unit.

Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.

Please remember that if you remove the panel display from the wall later, you will find the screw holes and anchor bolts for t

mounting unit left on the wall. Also note that long use of the panel display may discolor the wall around it due to its heat a

airflow.

Fig 1

All PDR mounts and adapters carry a limited lifetime warranty against defects in material and workmanship. We are not liable

for improper installation that results in damage to mounts, adapters or presentation equipment.

To register visit our web site @ www.pdrmounts.com

Mounts by

A division of David Engineering & Mfg. Inc.

for future reference.

of both the panel

Simple to adjust

Adapter plate included

125 lb rated

AWM 125-110 fits 37” to 60” displays

Rugged heavy gauge metal construction

Tough powder-coated finish

Extends 20.7” from the wall and closes to under 4.6”

Pivots left or right, tilts up 5 deg. and down 15 deg.

Includes cable management system

Tension bolts to adjust smooth action and eliminate creep

1 2 3 4 5 6

Inhaltsverzeichnis

Seite 1 - Mounts by

Model AWM125-110 ARTIC

Seite 2 - Rev 100708

the strength of the wood studs is not sufficient, add reinforcement. Always confirm the center of the stud is used for the installation. Avoid ins

Seite 3 - SUPPLIED HARDWARE

PART NUMBERPH-E-25-50-ST1/4-20 X ½" SELF T APPINGPAN HEAD SCREW4 REQUIRED SUPPLIED HARDWARE3PART NUMBERCT-E-37-37-00PLA

Seite 4 - Model AWM125-110

4 DRAWING SPECIFICATIONSModel AWM125-110Single stud articulating wall mount5°15°20.7”4.673.07”4°5.39”32.

Seite 5 - 1. FASTEN MOUNT TO THE WALL

1. FASTEN MOUNT TO THE WALL Fig 2Fig 32. ATTACH THE DISPLAY BRACKET TO THE DISPLAYDetermine the

Seite 6

3. Mounting the display onto the AWM125-110 Articulating arm3. Final adjustment and cable managementScrew lock tabNylon zip tie6Fig 4Fig 5Fig 61:

Kommentare zu diesen Handbüchern

Keine Kommentare

Pdr-mounts awm125 with pdm110thn Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für Video Pdr-mounts awm125 with pdm110thn herunter. PDR Mounts awm125 with pdm110thn User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör für Video Pdr-mounts awm125 with pdm110thn